If you own a rug or carpet then you must be curious enough to know the best way to clean it. This will save it from discoloration and fiber damage. When it is placed at a heavy traffic area like entrance then it sees lot of action especially in certain key locations.

You too can deal with your carpet cleaning process by removing occasional spills. No matter how careful you are stains do happen but make sure they are not permanent.

It is important to clean the stains as soon as possible. You need to scrape off viscous material before you apply the cleaning solution. Do not scrub it vigorously. If there are spills blot the place thoroughly with a white towel or sponge.

When you use the cleaning solution, it is always better to read the instructions first and carry out an area test. Make sure you use it in right amount because this can be a gateway for dust and dirt. Work out the solution in circular motions so that it does not spread to other areas.

Regular cleaning will increase the life of your rug. Remember all rug cleaning products should have the following characteristics like high foam levels. It should have a dense lubricity to reduce the damage to carpet fibers and dry to non-sticky residue.

If you want all these characteristics then you can use a shampoo with foamy chemicals in it. The most common ingredient in this is Sodium Laurel Sulfate because it exhibits very high foam. The only problem is that it has soft sticky residue that cause resoling.

Always try to work on the spills so that it does not spread further. Usually the common types of spills are food or pet urine. This can cause severe color run in which the odor can be tough to remove. Since urine has chemicals then it can be tough to remove and its presence can invite unwanted flies.

If your rug is of medium size then you can wash it at home than hiring professionals like Rug Cleaning Melbourne. This is possible with the help of hose and cool water. For larger carpets, use large plastic dishpan and saturate it with the help of cold water.